OWC Mercury Pro Legacy 120 GB 2.5" Serial ATA II MLC

SKU
OWCSSDMXLE120
Login For Pricing
Out of stock
120 GB, 2.5", MLC, SATA 3 Gb/s, 285 MB/s, 275 MB/s
Two Upgrades in One - IDE/ATA performance today... with 285MB/s SATA future performance capability.
- Near Instant Data Access: Complete solution for easy NO Drive Spin up...just lightning fast boots, loads, & access.
- Starts Fast/Stays Fast: NO Speed Degradation & 41x faster performance.
- More Rugged and Reliable: up to 100x more reliable than a hard drive.

The Mercury Electra™ 3G SSD line features:
- DuraWrite™ extends the endurance of your Solid State Drive (SSD).
- Intelligent Block Management & Wear Leveling automatically distributes data evenly across the entire SSD.
- Intelligent Read Disturb Management spreads the active read/write across the flash components eliminating data corruption caused by constant use.
- Intelligent "Recycling" for advanced free space management gradually re-writes data across the SSD over time to ensure data never gets corrupted.
- RAISE™ (Redundant Array of Independent Silicon Elements) protects the data on your drive similar to having a RAID setup.
- Best-in-Class ECC Protection for longest data retention and drive life.

Add a technological supercharger to your existing Mac or PC with the Mercury Pro Legacy 3.5" IDE/ATA SSD Internal Drive Kit. It's the fastest, most reliable IDE/ ATA mechanism available to breathe lightning fast performance into that trusty machine and extend its usefulness.

Boot, load apps, and access data nearly instantaneously...tedious system responsiveness is a thing of the past! Enjoy award-winning ultra-efficient Block Management & Wear Leveling technologies that virtually eliminate any speed reduction over long term use of the drive. And with no moving parts to break or fail, the Mercury Pro Legacy 3.5" IDE/ATA SSD Internal Drive Kit offers uncommon ruggedness and lifetime longevity for desktop users with up to 100x greater reliability than traditional hard drives.

Complete Solution For Easy Install In 3.5″ Drive Bays
For easy Plug and Play install into standard 3.5″ IDE/ATA drive bays, the Mercury Pro Legacy 3.5" IDE/ATA SSD Internal Drive Kit comes complete with a mounting sled and a SATA to IDE/ATA connector cable. Utilizing the Mercury Pro Legacy 3.5" IDE/ATA SSD Internal Drive Kit as a future upgrade in a SATA bus equipped computer and experiencing the drives true performance potential of up to 285MB/s is a simple matter of removing the connector cable.

Better by Design
"Mean Time To Failure" - We all know that nothing lasts forever. But that doesn't mean you shouldn't get the most out of your investment. OWC SSD with Durawrite™ Technology, optimizes writes to the flash memory over conventional controllers increasing the overall endurance and reliability of the complete SSD. Highly intelligent block management and wear leveling also extends the overall endurance. With this technology, even MLC-based SSDs can operate for years in demanding use applications without daily write restrictions. This adds up to a MTTF that is higher than most enterprise class hard drives and SSDs on the market today.

Additionally, as there are no volatile memory elements in this storage device, the need for cache is completely negated. The drive is just that fast from the get-go!

High Performance Internal Storage
Replace your conventional hard drive with a reliable solid state drive. Unlike traditional hard disk drives, OWC solid state drives have no moving parts, resulting in a quiet, cool, and highly rugged storage solution that also offers faster system responsiveness.
EAN 5706998929518
Specification
Hard drive
SSD capacity120 GB
Memory typeMLC
Data transmission
Read speed285 MB/s
Write speed275 MB/s
Random write (4KB)60000 IOPS
Random read (4KB)60000 IOPS
Write latency1 µs
Read latency1 µs
Data transfer rate3 Gbit/s
Security
Security algorithms128-bit AES
Endurance
Uncorrectable Bit Error Rate (UBER)< 1 per 10^16 bits read
Features
InterfaceSerial ATA II
Component forPC/Laptop
Controller typeSandForce 2181
NVMeNo
SSD capacity120 GB
Security algorithms128-bit AES
S.M.A.R.T. supportYes
Read speed285 MB/s
TRIM supportYes
Write speed275 MB/s
Memory typeMLC
Uncorrectable Bit Error Rate (UBER)< 1 per 10^16 bits read
Random write (4KB)60000 IOPS
Random read (4KB)60000 IOPS
Native Command Queuing (NCQ)Yes
Write latency1 µs
Read latency1 µs
Hardware encryptionYes
Data transfer rate3 Gbit/s
SSD form factor2.5"
Performance
InterfaceSerial ATA II
Component forPC/Laptop
Controller typeSandForce 2181
NVMeNo
SSD capacity120 GB
Security algorithms128-bit AES
S.M.A.R.T. supportYes
Read speed285 MB/s
TRIM supportYes
Write speed275 MB/s
Memory typeMLC
Uncorrectable Bit Error Rate (UBER)< 1 per 10^16 bits read
Random write (4KB)60000 IOPS
Random read (4KB)60000 IOPS
Native Command Queuing (NCQ)Yes
Write latency1 µs
Read latency1 µs
Hardware encryptionYes
Data transfer rate3 Gbit/s
Design
Component forPC/Laptop
SSD form factor2.5"
Weight & dimensions
Width70.1 mm
Weight77 g
Height7 mm
Depth100.1 mm
Operational conditions
Operating temperature (T-T)0 - 70 °C
Storage temperature (T-T)-55 - 150 °C
Minimum operating temperature0 °C
Maximum operating temperature70 °C
Technical details
InterfaceSerial ATA II
S.M.A.R.T. supportYes
Operating temperature (T-T)0 - 70 °C
TRIM supportYes
Storage temperature (T-T)-55 - 150 °C
Native Command Queuing (NCQ)Yes
Hardware encryptionYes
SSD form factor2.5"
Compliance certificatesRoHS
Other features
Compliance certificatesRoHS
Uncorrectable Bit Error Rate (UBER)< 1 per 10^16 bits read
Manufacturer OWC
Availability Out of Stock
Search engine powered by ElasticSuite